Variants

Beautiful views: our window sill range. When designing rooms, it is important to consider the windows, as light is a key factor in interior design.

A wide range of options: perfect solutions for renovations and new builds

The right window sill can blend in discreetly or make a design even more eye-catching. Our window sill range therefore includes a wide variety of window sill types with various surface coatings. Whether coated with HPL or thin laminate, there is something to suit every requirement. Our extensive window sill range includes window sills for renovation with a folded edge as well as post-formed window sills for modern new builds.

HPL surface

If you value genuine premium quality, you've come to the right place: the window sill is covered with 0.7 mm Getalit high-pressure laminate and meets all the requirements of EN 438.

Forming W

This window sill is made from a low-swelling 22 mm quality chipboard base. The top and front are covered with high-pressure laminate type HGP according to EN 438, and the front is rounded with a radius of 10 mm. The rear is protected with a 0.3 mm white edge. Decor on the underside as selected by the factory.

Product highlights

6 modern decors, also available in the new decor A 141 Pe (similar to RAL 7016)
Decor matches laminate, compact laminate, compound elements and worktops
High load-bearing capacity, impact, scratch and abrasion resistant, as well as lightfast according to EN 438
Available cut to size and as continuous stock from a quantity of 1

Classic W

The window sill made of low-swelling 18 mm quality chipboard has an 18 mm MDF-H edge. The top and front are covered with 0.7 mm high-pressure laminate, the front is rounded and wrapped around with a radius of 10 mm to the underside of the edge. The back is protected with a white 0.3 mm edge. The back of the edge is stabilised by a counterbalance. Decor of the underside according to factory selection.

Product highlights

6 modern decors, also available in the new decor A 141 Pe (similar to RAL 7016)
Decor matches laminate, compact laminate, compound elements and worktops
High load-bearing capacity, impact, scratch and abrasion resistant, as well as lightfast according to EN 438
Available cut to size and as continuous stock from a quantity of 1
Ideal for renovation thanks to its folded edge

Type Optima

Optimal conditions: this window sill made from 18 mm high-quality chipboard has a 50 mm folded edge. The top and front are covered with 0.7 mm high-pressure laminate. The front is rounded and has a radius of 10 mm around the bottom of the folded edge. The rear is protected with a white 0.3 mm edge. The rear of the edge banding is stabilised by a counter-pull. Decor of the underside according to factory selection.

Product highlights

Decor matches laminate, compact laminate, compound elements and worktops
High load-bearing capacity, impact, scratch and abrasion resistant, as well as lightfast according to EN 438
Ideal for renovation thanks to its folded edge

Laminate surface

Ready for everyday use: the window sill is covered with 0.5 mm Getalit laminate, making it perfectly equipped for daily demands.

Product highlights

10 modern decors, also available in the new decor A 141 (similar to RAL 7016)
Decor matches laminate, compact laminate, compound elements and worktops
Available cut to size and as continuous lengths from a minimum order quantity of 1

Inform

Absolutely on form: This window sill made of low-swelling 22 mm quality chipboard is covered on the top and front with laminate in accordance with EN 438. The front is rounded with a radius of 4 mm. The back is protected with a white 0.3 mm edge. Underside: resin-coated kraft paper.

Instyle

The name says it all: the window sill is made of low-swelling 18 mm quality chipboard with an 18 mm MDF H-edge. The top and front are covered with laminate, the front is rounded and has a 4 mm radius around the bottom of the edge. The rear is protected with a white 0.3 mm edge. Underside: resin-coated kraft paper. The rear of the edge banding is protected by a backing.

Thin laminate surface

For your convenience: the window sill covered with 0.3 mm thin laminate is the budget-friendly option in our window sill range.

Product highlights

Available in white
4 mm radius

Novaform

The window sill made of 22 mm high-quality chipboard is covered on the top and front with thin laminate in accordance with EN 438. Its front is rounded with a radius of 10 mm. The back is protected with a white 0.3 mm edge. Underside: resin-coated kraft paper.

Classico

A true classic: the window sill made of 18 mm high-quality chipboard with 18 mm edging. The top and front are covered with thin laminate, the front is rounded and wrapped around with a radius of 10 mm to the underside of the edge. The back is protected with a white 0.3 mm edge. Underside: resin-coated kraft paper. The back of the edge is stabilised by a counter-edge.

You may also be interested in:

Profile variants

An overview of all profile variants for our worktops.

FENIX NTM

FENIX NTM, characterised by an extremely matt surface – available as a worktop, compact panel or compound element.