Betosieb HWS is suitable for all concrete surfaces where an anti-slip surface is required, such as on stadium steps, platforms, or concrete surfaces with increased adhesion for subsequent sealing. Can be subjected to both longitudinal and transverse loads.
| Technical data | Dimensions in mm | Thickness mm | Weight kg/m² | Modulus of elasticity (N/mm²) | Bending strength (N/mm²) | ||
|---|---|---|---|---|---|---|---|
| along | across | along | across | ||||
| Betosieb HWS | 5200 x 2000 | 21 | 15.5 | 4100 | 4100 | 25 | 25 |
For production-related reasons, the surfaces may have slight optical differences
Subject to design modifications. Attention Reference values – these properties are not guaranteed.
Technical advice: Area load calculated from pure concrete pressure without safety coefficients. Diagram applies to a 4-field beam, deflection in the outfield. Permissible bending stress = calculated with load safety factor 1.5 / load duration 0.9 / material safety 1.3. The technical data are mean values which may vary due to the natural fluctuations of the raw material wood.
Single-sided self-adhesive polyethylene-based joint tape approx. 19 mm wide and 3 mm thick. It is used to seal the joints between formwork panels. The roll length of the Westafill joint tape is 10 m.
The high-quality two-component epoxy resin filler is suitable for shuttering construction, particularly for use with all film-coated plywood formwork panels from Westag.
The ready-to-use single-component paint offers a high degree of abrasion resistance and impact resistance, as well as good resistance to chemicals. It is used as edge protection for shuttering panels made of wooden composites.
Deutsch
English
