Magnoplan MF (melamine face) is suitable for smooth, jointless concrete surfaces with advanced requirements in accordance with DIN 18202/3, line 7. It will produce incredibly even matt concrete surfaces. With its high number of reuses, this panel is a popular choice on building sites and in precast concrete plants. The panel can be subjected to both longitudinal and transverse loads.
The main features and advantages of our formwork panel "Magnoplan MF" at a glance:
| Technical data | Dimensions in mm | Thickness mm | Weight kg/m² | Bending modulus (N/mm²) | Bending strength (N/mm²) | ||
|---|---|---|---|---|---|---|---|
| lengthwise | cross | lengthwise | cross | ||||
Magnoplan MF |
2000 x 5200 2000 x 5200
| 21 27 | 11,4 14,2 | 2600 1900 | 6800 7300 | 22 16 | 47 51 |
Test according to EN310. Subject to design modifications. Attention Reference values – these properties are not guaranteed.
Technical advice: Area load calculated from pure concrete pressure without safety coefficients. Diagram applies to a 4-field beam, deflection in the outfield. Permissible bending stress = calculated with load safety factor 1.5 / load duration 0.9 / material safety 1.3. The technical data are mean values which may vary due to the natural fluctuations of the raw material wood.
Single-sided self-adhesive polyethylene-based joint tape approx. 19 mm wide and 3 mm thick. It is used to seal the joints between formwork panels. The roll length of the Westafill joint tape is 10 m.
The high-quality two-component epoxy resin filler is suitable for shuttering construction, particularly for use with all film-coated plywood formwork panels from Westag.
The ready-to-use single-component paint offers a high degree of abrasion resistance and impact resistance, as well as good resistance to chemicals. It is used as edge protection for shuttering panels made of wooden composites.
Deutsch
English
